09 March 2011

Extruded Foam Sheets in Place

I'm done gluing down sheets of 3/4" extruded foams on top of the plywood. I've also put a first coat of paint on the two layout sections where foam was already in place. I used a yellowish tan color, maybe it's a bit too yellow. I'll try to adjust the color with the second coat. Here are few shots of the current status.

I've also replaced few more plastic wheelsets with metal ones from Fox Valley Models I received with my last order. The more I replace the more convinced I'm doing right. Metal wheelsets are much better.

See you soon...

No comments: