Laying Extruded Foam

Yesterday I went to a quite big home improvement and DIY store and bought additional sheets of 3/4" extruded foam I planned to use on top of the plywood, as the base layer. Today I cut various pieces to fit the three layout sections and started gluing them on to the plywood. I used regular white glue for this and few bottles of water to keep the foam in place while the glue cures.

I also added a piece of fascia that was still missing on the left section and secured the fascia with screws in several points where the small spikes I used were not enough to keep it in place.

See you soon...